15kg – 1.2mm Welding Alloys LP-G Hardfacing Flux Core Mig Wire for positional welding
$579.00
For use with Mixed Gas
Welding Alloys HARDFACE LP-G is an All-Positional cored wire used for hardfacing components subject to metal -metal wear or high abrasion in ground engaging applications.
By introducing Flux to the cored wire the weld deposit can be applied vertically alowing hardfacing to be applied in suitable applications.
The weld deposit is a medium alloy, Martensitic steel with good impact resistance and high hardness. . It is an economical wire with good abrasion resistance.
The weld deposit is just machinable with special tools.
Applications
Resistance to abrasion and impact in dry or wet environments.
Agricultural & earthmoving equipment, compactor wheels, shredders for wood or rubbish, recycling machinery.
Bucket teeth, lips and undersides, cutting edges, steel mill rolls, cable drums, sand dredge equipment, dragline buckets, conveyor chutes, grizzly bars
Ideal for site welding of wear liners to provide protection to corner joints and exposed weld seams.
Download Product Specifications – Download link
Classifications
AS/NZS 2576-2005 1855-B5
DIN 8555 G 1-300-P
EN 14700 TFe8
Equivalent to Stoody 965-G
Typical Hardness
55-60 HRC – Rockwell (3 layers as welded)
520-578 HB – Brinell
640-770 HV – Vickers
Packaging Specifications
15kg Spool
1.2mm Wire
It is used with Mixed Gas Argon 5/2 or similar Mixed Argon gas.
Spool Outside Diameter = 300mm
Spool Hub inside Diameter = 51mm
Gas Shield wire – WELDING PARAMETERS
Wire
Diameter
Current (Amps)
Voltage (Volts)
Stick-out(mm)
Polarity
Range
Optimum
Range
Optimum
Range
Optimum
1.2mm
100-280
220
18-30
22
15-25
20
DC+
1.6mm
150-350
300
22-30
26
15-25
20
DC+
