Bohler FOXCORE 308L-T1 1.2mm 15kg Alambre MIG con núcleo de fundente
$539.00
Product Introduction
High-alloyed austenitic stainless flux-cored wire E308LT1-4, ideal for welding 304L type stainless steels with good corrosion resistance. Features strong arc, fast freezing slag, excellent slag detachability, and all-position welding capability. Suitable for service temperatures from ¨C196¡ãC to 350¡ãC.
Product Parameters
| Classification | E308LT1-4 |
| Diameter | 1.2mm |
| Weight | 15kg |
| Base Materials | 304, 304L, 321, 347 |
| Service Temp Range | ¨C196¡ãC to 350¡ãC |
15kg – 1.2mm Bohler FOXCORE 308L-T1 Flux Cored Stainless Steel MIG Wire
Experimente un rendimiento de soldadura superior con el alambre tubular con núcleo de flux Bohler FOXCORE 308L-T1 ¨C diseñado para precisión, durabilidad y versatilidad en aplicaciones de acero inoxidable. Diseñado para profesionales que buscan resultados confiables en entornos críticos.
Especificaciones básicas
| 304, 304L, 321, 347 & more |
Ventajas Clave
? Superior Arc Performance: Stronger arc and faster freezing slag compared to T0 variants
? All-Position Welding: Excellent results in vertical up and overhead positions without setup adjustments
? Minimal Spatter: Clean welds with exceptional slag detachability
? Corrosion Resistance: Ideal for oxidizing acids and dilute reducing acids
? Wide Penetration: Ensures even fusion to prevent lack of side-wall fusion
Aplicaciones
Perfecto para soldar aceros inoxidables 304L, 321 y 347 en industrias que incluyen procesamiento químico, equipos de alimentación y fabricación arquitectónica. Adecuado para entornos de corrosión moderadamente severos y temperaturas de servicio de hasta 350¡ãC.
Aseguramiento de Calidad
Fabricado por Bohler Welding ¨C un líder global en consumibles de soldadura. Cada carrete cumple con estrictos estándares de calidad para un rendimiento y fiabilidad consistentes en aplicaciones profesionales.
¿Por qué elegir FOXCORE 308L-T1?
? Faster slag solidification than T0 DG variant
? All-position capability eliminates need for multiple wire types
? Superior low-temperature toughness (-196¡ãC)
? Optimal choice for stabilized stainless steels (Ti/Nb)
Preguntas Frecuentes
Q: Can this wire weld 316 stainless steel?
A: No, use FOXCORE 316L-T1 for 316 base materials.
Q: Is preheating required?
A: Not typically for thin sections; consult welding procedure for heavy gauge materials.
Q: What shielding gas is recommended?
A: Not required ¨C self-shielded flux core design.
Q: Can it be used for high-temperature service above 350¡ãC?
A: No, use niobium-stabilized FOXcore 347-T1 for elevated temperatures.
¿Listo para elevar tus proyectos de soldadura en acero inoxidable? Contáctanos hoy para obtener precios competitivos y soporte técnico.
