15kg 1.6mm ArcoCrush FE60-SS Gasless Hardfacing MIG Wire
$690.00
Product Parameters
| Weight | 15kg Spool |
| Wire Diameter | 1.6mm |
| Hardness | 60 HRc (2 layer) |
| Type | Gasless, Self Shielded |
| Carbide Content | Up to 60% Fused Tungsten Carbide |
Introduction
ArcoCrush FE60-SS is a gasless hardfacing MIG wire with 60% FTC particles, ideal for extreme abrasion resistance up to 250oC. Suitable for mining, earthmoving, agricultural equipment, and wear components. Self-shielded design requires no gas, with DCEP polarity. Best limited to 2 layers.
15kg – 1.6mm ArcoCrush FE60-SS Gasless Hardfacing MIG Wire Spool
Engineered for extreme abrasion resistance in Australian industrial environments, the ArcoCrush FE60-SS hardfacing wire delivers unmatched performance for critical wear management applications. This self-shielded flux-cored solution combines 60% Fused Tungsten Carbide (FTC) particles with a martensitic steel matrix to create durable weld deposits that withstand temperatures up to 250oC.
Core Specifications
| Weight | 15kg spool |
| Wire Diameter | 1.6mm |
| Hardness | 60 HRc (2-layer), 627 HB – 2350 HV |
| Carbide Content | Up to 60% Fused Tungsten Carbide |
| Shielding | Self-shielded (gasless) |
| Classification | AS/NZS 2576-2005, 3460-B7 |
| Part Number | ACR-FE60SS-1.6-SP15 |
| Polarity | DCEP (Electrode Positive) |
| Max Layers | 2 layers |
| Operating Temp | Up to 250oC |
Key Advantages
- Superior Wear Resistance – 60% FTC particles remain solid during welding, ensuring optimal abrasion protection
- Gasless Operation – Eliminates shielding gas requirements for on-site convenience
- Heat Control – Fine carbide particles require minimal heat input, preserving structural integrity
- Industry Compliance – Meets AS/NZS 2576-2005 standards for quality assurance
Applications
Ideal for low-impact crushing components, mining equipment, earthmoving tools, agricultural machinery, and wear plate cladding. Specifically recommended for bucket lips, chutes, augers, pump impellers, and slurry pipework in mobile or stationary industrial settings.
Performance Testing
Field tests confirm exceptional durability in abrasive environments, with post-weld relief checking as normal characteristics. The non-machinable weld deposit maintains 60 HRc hardness after two layers, outperforming standard hardfacing wires in mining and construction applications.
Quality Assurance
Manufactured to strict Australian industrial standards, each spool undergoes rigorous quality control. Equivalent to Talarc Hardface Postalloy 299-SPL and Lincoln STAINCARB W-O, ensuring compatibility with existing hardfacing protocols.
FAQ
Q: What causes dark surface appearance during welding?
A: Indicates overheating; reduce amperage to preserve carbide integrity.
Q: Can this wire be used for high-impact applications?
A: Recommended for low-impact applications; consult technical data for high-stress scenarios.
Q: Is preheating required?
A: Not specified; follow standard hardfacing preheating procedures for base material.
Ready to enhance your equipment’s wear resistance? Contact us for technical specifications, bulk pricing, or application guidance.
