COBRA Industrial 1m Weed Burner + LPG Regulator & 6m Hose – Made in Europe

The COBRA Industrial Weed Burner offers an effective and environmentally friendly solution for controlling weeds around Large Patches of Garden Grass or Cracks. Pass the flame over and around a weed to destroy its cells. Once the heat destroys the cells in any section of the weed’s stem, water and nutrients cannot reach the leaves and the weed dies. From the bottle, the gas runs to the COBRA Regulator and then into the 6m Gas Hose and into the burner. Allowing user flexibility around the weed burning area. This is the highest quality to cost weed burner on the market, being made to the highest standard in Europe to withstand abuse in the Australian market. 

Features: 

Made in Europe 
Steel shaft and burner
Long reach burner (900mm)
Runs off Standard Australian LPG Bottle, 8.5kg and 9kg (BBQ bottle)
300MJ Heating Flame
Backed by a 5-year warranty on burner and regulator.
12 months warranty on hose 
60mm head
A precise variable flame control knob
A better alternative to chemicals
Very economical to run
Great for weed burning, heating, and waterproofing 
Trelleborg 6m LPG Hose Included (Made in France) 
Australian standard 5/8 UNF L/H connections on the regulator outlet and torch handle
COBRA LPG Regulator Included 
Spark Lighter Included
Set LPG pressure to 250 KPA
Weed burner will use about 7kg of LPG per hour at full power
Harris Part #: HKAL801 or HKAL601
The pilot flame adjustment is the top screw on the handle. (This usually will not need adjusting)
Total weight of handle, head and wand is 1kg.