Strong Hand Inside / Out Fixed 90° Magnet 30° & 60°

Hold stock from the outside, leaving clearance for inside welds, or hold stock from the inside for outside welds.

Features: 

The Inside / Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to workpieces
Use mounting holes to link two magnets together for use as fixturing elements.
Use hex hole on the magnet for breakaway leverage.
Hold and position sheet metal, round pipes, square, angled or flat stock.
Should be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 175ºF / 80ºC and above.
1x MLD300 75.5mm Long x 52mm wide x 14mm High
1x MLD500 125mm Long x 85mm Wide x 18mm High